
Chris’ Sculpture “For the Joy of it” was featured on the cover of Wood Carver’s supply in August 1992.
Chris’ Sculpture “For the Joy of it” was featured on the cover of Wood Carver’s supply in August 1992.
Figure 1Figure 2Figure 3 Figure 1: The original weight of this West Texas juniper log was 475 pounds. When finished the piece was still very close to it's original dimensions but had lost 450 pounds. Figure 2: The positions of the heads have been...
Figure 1Figure 2Figure 3 Figure 1: The tree is still rooted in the ground. The approximate weight of this West Texas juniper is 350 pounds. Figure 2: The log is cut loose. Note the horse's rider drawn to the right of the carving mallet. Figure 3: The figures are...
Figure 1Figure 2Figure 3 Figure 1: This 165 pound twisted Texas juniper trunk sits next to a 36-bow saw. It was no easy task to get it out of the canyon. Figure 2: The saw marks are visible as stair steps. Large pieces of wood can be removed buy cutting, then...
0 Comments